SOLUTIONS
Many solutions use Lead-Acid, Gel and AGM batteries as starter or UPS backup battery. Battery monitoring SYSTEM (BMS) is used for continuous monitoring of a battery capacity. Our device performs Capacity , State of charge (SoC) and State of Health (SoH) analysis
BatteryMS for starter battery
MARINE – BOAT, YACHT
CAMPER TRAILER AND CARAVAN
PROFESSIONAL VEHICLES
BatteryMS for Backup generator batteries
BACKUP AND OFF-GRID
BATTERYMS FOR BACKUP AND OFF-GRID
CONSTRUCTION & MAINTENANCE
BATTERYMS FOR CONSTRUCTION & MAINTENANCE
COMMERCIAL
BATTERYMS FOR COMMERCIAL
BatteryMS for UPS Battery
FIRE ALARM
BATTERYMS FIRE ALARM
EMERGENCY RADIO STATIONS
BATTERYMS EMERGENCY RADIO STATIONS
COMMUNICATION
BATTERYMS COMMUNICATION
OUR ADVANTAGES FOR DIFFERENT SOLUTIONS
Our The things that make us special
ANALYSIS OF STATE OF HEALTH (SOH)
Replace battery – constant red signal appears when the battery State of Health (SoH) is below 40%-30% of nominal capacity.
CHECK OF State of charge (SoC)
Check of State of charge. Yellow signal appears when battery capacity is below 50%, and disappears when battery capacity is above 80%.
Battery capacity fully condition test
Battery full – constant signal Vbat appears when battery capacity is above 80%, and disappears when battery capacity is below 50%.
THE DEVICE IS EASY TO INSTALL AND USE
The BatteryMS device has a simple 2-wire input connection to the battery