BatteryMS Academy
All answers to your questions
answers to your questions
What types of batteries do you check for capacity?
Our BatteryMS device – Automatic Battery Analyzer(ABC) destined to perform real time dynamic test to Lead-Acid, GEL and AGM batteries
What battery voltage does the device test with?
BatteryMS device can monitoring 12V and 24V Batteries
Does our device require any maintenance?
BatteryMS device is designed to high operational reliability and “maintenance free”. It operates without any maintenance
Does the device require a separate power source, battery?
The device does not use a separate power source. The device is powered by a battery and has very low energy consumption. The consumption of energy reach a very low level, due to the short test lapse of time.
Ability to monitor the voltages, current, temperature, state of health and state of charge of lead-acid batteries.
The system can be programmed to monitor these battery parameters.
Ability to monitor up to 4 (four) batteries simultaneously.
The BATTERYMS uses an advanced microcontroller with proven intelligent software
algorithms that measures battery capacity. This intelligent software module will readily monitor a battery bank up to 4000A simultaneously (at 120A more than 30 batteries). The BATTERYMS measurements are preprogrammed at specified intervals, it then calculates and compensates for variables to obtain accurate results. This technology makes possible ambush in stealth
mode.
Ability to retrofit into existing ground vehicle platforms and multi-battery power systems.
Complies with retrofit requirement.
Complies with EPLS required vehicle data networking infrastructure(SAE J1939)
Our company has 12 years of programming experience interfacing with J1939 protocol.
Compatible networking capabilities as part of EPLS and/or other platformupgrade efforts.
OUR company is experienced in vehicle systems communications using J1939 to communicate with driver instrumentation, engine/transmission controllers, and vehicle maintenance monitoring. BatteryMS DEVICE is compliant with Mil Std. 810F, 1275, 464 and 461E and F
On-board computer independent for stand-alone operation is integral to the BATTERYMS design features.
The intelligent BATTERYMS device generates RS-232/485 or wireless data streams providing a comprehensive status report regarding battery health. For instance, it can display the operational status of a military vehicle under storage.
Built-in data display and interface panel.
Batteryms sends data (serial or wireless) to a monitoring station, showing theaccurate battery capacity status and makes appropriate recommendations.
What battery parameters does the device monitor?
BatteryMS device monitor – Battery capacity, State of Charge level, Battery State of Health
The system monitors status of the battery under test by safely measuring dynamic parameters such as short circuit current, open circuit voltage. Test results are computed using patented technology and know how as a result of many years in R&D.
We submit for your consideration the Automated Battery Controller
The ABC enables the vehicle to
avoid battery failure necessitated by deactivation of the engine while in stealth
mode operations. Advantage to the stealth war fighter!